AQ-10 Operating Instructions
Page 5
www.emacoustics.co.uk
THANKS
Thank you for choosing an AQ-10 amplifier for your application. Please spend a little time
reading through this manual, so that you obtain the best possible performance from the unit
and become familiar with its operating requirements.
The AQ-10 is designed and manufactured by MC
2
Audio in the UK. All MC
2
products are
carefully designed and engineered for cutting-edge performance and world-class reliability. If
you would like further information about your AQ-10 or any other EM Acoustics product,
please contact us.
We wish you many years of service from this amplifier and look forward to hearing from you
in the near future.
INTRODUCTION
The AQ-10 is the most powerful four channel amplifier within the EM Acoustics range. It has
been designed to meet demands for higher power and increased efficiency, whilst still
maintaining the renowned sonic qualities and unsurpassed reliability associated with our
loudspeaker products.
MC
2
proprietary class-D technology with a dual feedback loop system gives exceptional
transient response and a resonant switch mode power supply with a large reservoir gives
extremely high peak power without any “bass sag”.
Newly designed limiters, linked to the output current monitors and power supply, keep mains
input and output currents within a safe operating area at all times, whilst maintaining
transparent sonic performance.
Running cool in even the most difficult conditions, the AQ-10 can deliver over 2500W into 4
ohms with all channels driven, and a massive 2 x 7400W bridged (4R), with outstanding
distortion and noise figures right up to maximum output.
The amplifier, of course, includes full DC, VHF, thermal and short circuit protection to ensure
continuous trouble-free service.
