4.4
Fitting the break-out door adaptor
a Rotate the three tension bolts downwards.
b Keep the break-out fitting together with the anti-sag adjustment device.
c Slip the break-out door adaptor over the break-out fitting until the front edges of the door and
the break-out door adaptor lie edge to edge.
d Tighten the three tension bolts and the bolt on the anti-sag adjustment device.
e Fit the door carriage fittings into the break-out door adaptor and hang the door leaves on the
track of the operator in accordance with the instructions in the manual for the operator con-
cerned.
f
Check that the door leaf is parallel with the break-out door adaptor. If not adjust as follows:
g Break out the door leaf.
h Loosen the three tension bolts.
i
Compensate for sagging doors by turning the bolt on the anti-sag adjustment device up or
down.
j
Tighten the three tension bolts.
AAA220A
1
2
4
3
Tension bolt (3 pcs)
1
Anti-sag adjustment device
2
Break-out door adaptor
3
Break-out fitting
4
1003658-EMEI-2.0
Issue 2014-03-20
12
4 Installation
Summary of Contents for AAA221
Page 19: ......
