Page 20 of 25
S-218 User Manual
v1 October 2019
7.0 – Servicing Information
All S-218 components can be removed for service purposes if required, using the minimum of tools.
DRAWINGS ILLUSTRATE THE ST-218 FLYABLE VERSION, BUT THE SERVICE DETAILS ARE
IDENTICAL BETWEEN THE S-218 AND ST-218.
7.1 – S-218/ST-218: Removing the grille
TOOLS REQUIRED: 4mm Allen key
1.
Lie the enclosure on its’ back and remove the sixteen M6x30 countersunk socket screws using a 4mm
Allen key, and then lift the grille clear of the cabinet.
2.
To replace the grille, position the grille on the front of the S-218 (logo badge should be on the left of
the enclosure when in a flown configuration) and ensure the threaded fittings on the grille are lined
up with the mounting holes. Replace each of the sixteen M6x30 countersunk bolts and ensure all
machine screws are started in their threads before beginning to tighten. Ensure they are all tightened
evenly so that the grille sits straight and flat and does not rattle.
