ELZAB DE2106, Setting Manual, Page: 49 / 134

49 / 134
Customize and modify the single reading time
Example: To set the limit time of a single code reading to 1500ms, you can set it according
to the following steps:
1. Scan the "Enable Setting" setting code (you don't need to scan when it is turned on);
2. Scan the setting code of "Customize and modify single reading time";
3. Scan the "1", "5", "0" and "0" setting codes in "Appendix-Data Code" in turn;
4. Scan the "Save" setting code in "Appendix-Save and Cancel Settings";
5. Scan the "Disable Settings" setting code.
Continuous reading mode-reading interval time
The reading interval is the time between two readings. Regardless of whether the reading
is successful or unsuccessful, there will be a set time interval between two readings, during
Single reading time 3000MS Single reading time 5000MS