background image

2

Precautions

WARNING: High Voltage

  Risk of electric shock.

  Do not open chassis.

  Refer service to qualified service staff only.

  Before connecting the device to the main power supply, check if the 

right voltage is selected.

  Replace fuse with the same type and value only.

  This device must be connected to ground.

  Do not use a damaged power cord.

  Never place containers with liquid, e.g. beverages or a vase, on the unit.

  Do not expose this device to rain or moisture.

  Do not use this device near water, e.g. swimming pool, bathtub or wet 

basement.

CAUTION: Temperature

  Surfaces of the device may become hot during operation.

  Do not install this device near any heat source such as radiators, stoves 

or other heat sources.

  Always allow enough ventilation space around the unit for air circula-

tion.

  Do not cover circulation vents.

CAUTION: Connecting & Mounting

  Never connect the output of a power amplifier to this device.

  Place the unit on a rigid board or place it in an appropriate rack.

  Use the device according to this manual only.

CAUTION: Humidity

  If this device is moved from a cold place to a warm room, condensation 

can occur inside the device. To avoid damaging the unit, please allow it 
to reach room temperature before switching it on.

Summary of Contents for xfilter

















Reviews: