13
EKKO
Assembling the pillar bracket:
Securing the gearmotor to the pillar bracket:
Fit the gearmotor to the bracket:
- Unscrew the screw F, then remove the casing C
- Insert the washer R putting it on the bracket
- Insert the gearmotor
- Lock the gearmotor with the screw V and nut (do not overtighten the nut, check the rotation of the gearmotor that must have no friction)
This is the correct position of the pin for fastening the gate leaf drive bracket, proceed as follows:
- Assemble the bracket as shown
F
C
V
R
EN
