Elvox 5GL6 Instruction Manual Download Page 3

GB

TELECAMERA ART. 5GL6

3/4

SAFETY INSTRUCTIONS FOR INSTALLERS

- Carefully read the instructions on this leaflet: they give important information on the safety, use and maintenance of the installation.
- After removing the packing, check the integrity of the set. Packing components (plastic bags, expanded polystyrene etc.) are dangerous for children. Installation must be

carried out according to national safety regulations.

- It is convenient to fit close to the supply voltage source a proper bipolar type switch with 3 mm separation (minimum) between contacts.
- Before connecting the set, ensure that the data on the label correspond to those of the mains.
- Use this set only for the purposes designed, i.e.for electric door-opener systems. Any other use may be dangerous. The manufacturer is not responsible for damage cau-

sed by improper, erroneous or irrational use.

- Before cleaning or maintenance, disconnect the set.
- In case of failure or faulty operation, disconnect the set and do not open it.
- For repairs apply only to the technical assistance centre authorized by the manufacturer.
- Safety may be compromised if these instructions are disregarded.
- Do not obstruct opening of ventilation or heat exit slots and do not expose the set to dripping or sprinkling of water.
- Installers must ensure that manuals with the above instructions are left on connected units after installation, for users' information.
- All items must only be used for the purposes designed.
- The ominipolar switch must be easily accessed.
-

WARNING:

to avoid the possibility of hurting yourself, this unit must be fixed to the wall according to the installation instructions.

- This leaflet must always be enclosed with the equipment.

Directive 2002/96/EC (WEEE)

The crossed-out wheelie bin symbol marked on the product indicates that at the end of its useful life, the product must be handled separately from household refuse
and must therefore be assigned to a differentiated collection centre for electrical and electronic equipment or returned to the dealer upon purchase of a new, equiva-
lent item of equipment.

The user is responsible for assigning the equipment, at the end of its life, to the appropriate collection facilities.
Suitable differentiated collection, for the purpose of subsequent recycling of decommissioned equipment and environmentally compatible treatment and disposal, helps pre-
vent potential negative effects on health and the environment and promotes the recycling of the materials of which the product is made. For further details regarding the col-
lection systems available, contact your local waste disposal service or the shop from which the equipment was purchased.

Risks connected to substances considered as dangerous (WEEE).

According to the WEEE Directive, substances since long usually used on electric and electronic appliances are considered dangerous for people and the environment. The
adequate differentiated collection for the subsequent dispatch of the appliance for the recycling, treatment and dismantling (compatible with the environment) help to avoid
possible negative effects on the environment and health and promote the recycling of material with which the product is compound.

Camera supply connector

Video signal connector

-

+

GND

VIDEO

FEATURES

NIGHT AND DAY COLOR (DSP) CAMERA 1/3” 

WITH 25mm FIXED LENS

SPECIFICATIONS

PICK-UP DEVICE

1/3” SONY Inter-line HAD CCD

EFFECTIVE PICTURE ELEMENTS

STANDARD PAL 1Vpp 75 Ohm 

IMAGE PICTURE ELEMENTS

500 (H) x 582 (V)

HORIZONTAL RESOLUTION

420 TV lines

MINIMUM ILLUMINATION

Led off – 0,04 Lux (F 1,6 Agc on, 10 IRE)
0,6  Lux (F 1,6 Agc on, - 50 IRE)
0 Lux IR LED on

ILLUMINATION DISTANCE

Approx. 50m

ILLUMINATION

24 x 850nm High Light LEDs

SIGNAL TO NOISE RATIO

MORE THAN 48 dB

AUTO ELECTRONIC SHUTTER

PAL: 1/50s ~ 1/110,000s

GAIN CONTROL

AGC AUTOMATICALLY

WHITE BALANCE

AUTOMATICALLY (2500K ~ 9500K)

GAMMA CHARACTERISTIC

0.45

LENS 25mm

SYNCHRONOUS

INTERNAL

BACK LICHT

AUTOMATIC

VIEW ANGLE

15 Degree

POWER SUPPLY

12 VDC ± 10%

PROTECTION STANDARD

IP66

POWER CONSUMPTION

4.8W (Max.)

OPERATING TEMPERATURE

-10° C ~ + 50° C (14 °F to 122 °F)

EXTERNAL DIMENSIONS

(ø) 170 mm x (H) 58 mm 

EXTERNAL CONNECTIONS

BNC

HOUSING

Alloyed Aluminium, silver/iron grey

HIGH LIGHT LED IR  

TRADITIONNAL LED 

Reviews: