3
EN
Note on the usage for installation
• Please read this user’s manual thoroughly prior to use the unit for its easy and convenient use.
• Do not install the product where is in extremely low or high temperature conditions, exposed to the rain, the snow, the
vibration, the shock, the direct ray of sunlight, the high humidity, and at the approach of oil and gas storage. Please avoid
installation at the places be exposed to radio waves (RF) or near the power lines too. It might cause lower performance or the
malfunction.
• Do not disassemble the products or put the foreign objects such as metals.
• The unit is subject to electric shock hazard. Be careful not to get an electric shock while using the device.
• Only use safety approved power supply units with electromagnetic compatibility.
• Use this product only in the temperature range from -10°C to +50°C.
• Be careful of the connection of junction.
• Please check the cable insulating state before supplying the power.
• Please check the input power current and voltage before supplying the power.
• Make sure the power off prior to installation.
• Do not subject the product to the shock and vibration.
• Do not use the device when any smoke or smell is produced from device. It may cause the fire. Please turn off or remove the
power supply immediately and contact your distributor to check the device properly.
• If the power does not turn On, please make sure the power cable is correctly connected.
• Please Use the coaxial cables exclusively for HD-SDI signal transmission.
• Please refer to the table of transmission distance for each type of coaxial cable. It has a different loop resistance depending
on the cable quality.
• Make sure specifications and installation guideline before using
• If the device does not work properly, please contact your distributor.
1. Introduction
46346.001 are long distance HD-SDI signal transmission devices which consist of transmitter and receiver. These products
transmit HD-SDI signals up to 200m using RG59 Coaxial cable, and the case of compact size comes into useful to save instal
-
lation space. It is very effective and economical solutions as it transmits HD-SDI signals over a long distance without installing
repeaters and connecting cables on the middle of the transmission line.
1-1. Features
• Distance extension up to 200m (HD: 1.485G/RG-59) without installing Repeaters
• Easy for changing analogue system into HD-SDI by using the existing coaxial cable.
• Possibility to extend the transmission distance of the signals by using repeater 46364.002
• Surge protection function
• Compact and light-weight case for easy installation.
• Dual power (DC12V/AC24V) model is available separately.
1-2. Support Resolution
• Our HD-SDI transmission solutions conform to the SDI signal standards of the SMPTE (Society of Motion Picture and Televi
-
sion Engineers).
• The SDI (Serial Digital Interface) is an innovative transmission system which can transmit uncompressed video signals over
a single cable. As SDI signals are digital, it is possible to transmit signals over limitless distances without modification thanks
to equalizing and reclocking feature at certain distance. Also, there is no aging or delay caused by compression.
HD-SDI (SMPTE 292M)
3G-SDI (SMPTE 424M)
1280 x 720p, 24/25/30/50/60 Hz
Not Supported
1920 x 1080p, 24/25/30 Hz
The HD-SDI signal from Receiver’s output and Transmitter’s input.
