6
1)
MIC:
connect to MIC
2)
DC12V:
connect to power supply
3)
LAN:
network port (some models support PoE power supply)
- Focus Adjustment
Step 1: Remove the sun shade and lens case from the device as shown above.
Step 2: Loosen the screws of the lens for focusing. Then rotate the lens left or right to adjust the focus.
Focus: Rotate left or right to adjust definition of the image.
Zoom: Rotate left or right to zoom in or out the image.
2 Installation
2.1 Install IP-CAM to Ethernet Network
The connection of digital video server is show below.
Figure 2-1 Connection
Please connect the PC and IP-CAMERA in accordance with the above picture.
The connection steps are shown as below:
Step 1: Connect the monitor, microphone and network to the device.
Step 2: Connect the power supply.
Step 3: Install the device.
Focus
Zoom:
EN
LAN
Alimentazione
MIC
HP
Alm_GND
Alm_IN
LAN
Alimentazione
MIC
HP
LAN
MIC
Alm_NO
Alm_COM
RS485-
RS485+
Alm_GND
Alm_IN
Alm_NO
Alm_COM
RS485-
RS485+
Alimentazione
Modem
Switch
LAN
Internet
Modem
Allarme
PTZ
Switch
LAN
Internet
Sensore
Modem
Allarme
PTZ
Tastiera
Switch
LAN
Internet
Sensore
1
2
3
LAN
Alimentazione
MIC
HP
Alm_GND
Alm_IN
LAN
Alimentazione
MIC
HP
LAN
MIC
Alm_NO
Alm_COM
RS485-
RS485+
Alm_GND
Alm_IN
Alm_NO
Alm_COM
RS485-
RS485+
Alimentazione
Modem
Switch
LAN
Internet
Modem
Allarme
PTZ
Switch
LAN
Internet
Sensore
Modem
Allarme
PTZ
Tastiera
Switch
LAN
Internet
Sensore
MIC
LAN
Power supply
