Installation
33
© 2020, Elon Group AB. All rights reserved.
Connect the water supply hose to the machine
1.
Lift the supply hose to the inlet valve at the rear of the machine.
2.
Screw the coupling onto the threads of the tap until tight.
Connect to an external drain
CAUTION!
•
Do not kink or stretch the drain hose.
•
Position the drain hose properly, as it could lead to a water leak if it is damaged.
•
Do not immerse the end of the drain hose into the waste water. Immersing the hose could hamper the
drainage and cause waste water to go back into the machine again.
Position the drain hose into a floor drain
