elvita CTM1612V, User Manual

Page: 71 / 152

71
GB
Installation
Remove transit bolts
Please take the following steps to remove the bolts:
1. Loosen the 4 bolts with a spanner and then remove them.
2. Plug the holes with the transit hole plugs.
3. Keep the transit bolts for future use.
Levelling the washing machine
1. Check that the feet are are screwed into the base of the appliance.
2. Loosen the lock nut and turn each foot until it makes firm contact with the floor.
3. After adjustment, tighten each lock nut with a spanner, making sure the machine
is steady.
WARNING!
• You must remove the transit bolts from the rear before using the
product.
• You will need the transit bolts again if you move the product, so
make sure you keep them in a safe place.
WARNING!
• The lock nuts on all four feet must be screwed tightly against the
housing.
1 2 3 4