
77
GB
Installation
Connecting the water supply hose
Connect the supply hose as indicated, there are two ways to connect the supply
hose.
1. Connection between ordinary tap and supply hose.
2. Connection between screw coupling and supply hose.
Connect the other end of supply hose to the inlet valve at the rear of the appliance
and turn the coupling clockwise until tight.
WARNING!
• To prevent leakage or water damage, follow the
instructions in this chapter!
• Do not kink, crush, modify or sever the water
supply hose.
• For models equipped with a hot water inlet,
connect this to a hot water tap using the hot water
supply hose. Energy consumption will decrease
automatically for some programs.
slide bushing
clamp nut
5 mm
Loosen clamp nut and four
bolts
Tighten clamp nut
Pull back the slide bushing, push
hose on to tap
Connection
complete
Tap with threads and supply hose
Special tap for washer dryer
slide bushing
water supply hose
water inlet valve