21
© 2022, Elon Group AB. All rights reserved.
Fig. 9
ASSEMBLY OF PRODUCT
Installation Template
Drilling the Hanger Holes
Paste the installing template provided within the
product on the surface where the product is to be
installed.
Make holes with Ø4 mm diameter on the points
marked as A, B, C, D on the installing template (Fig.
9).
Drill the flue outlet hole specified in the installing
template in the sizes given.
The sizes shown is the illustration is
for representation purposes. Take
the installing template provided in
the product you have purchased into
attention.
The appliance should be mounted on the cabinet on
the points A, B, C, D by using 4 x 40 screws provided
with the appliance. The front panel should not be
rubbed against the cabinet cover when the sliding set
moves (Fig. 10).
Fig. 10
