67
© 2021, Elon Group AB. All rights reserved.
5.4
Cleaning the side brushes
1. Undo the screws that hold the side
brushes, using a screwdriver.
2. Take out the side brush, remove the hair
and debris from the side brush and
surrounding area.
Clean the front, left and right wheels
regularly with a cleaning brush.
(Note: Hairs and the like may become
wrapped around the wheel axle. Please
remove them as soon as possible.
After each cleaning session is
completed, use a dry cotton cloth to dry
the transparent plate and prevent dust
from accumulating on the plate, which
could affect the performance of this
product.
IR sensor
Floor detection sensor
Fault
description
Symptom
Cause
Solution
Dust box
failure
A red light flashes slowly
and there is a single beep
Dust box not securely fitted
Secure the dust box to the
main body
Dust box full
Sequence of 5 beeps
The box is full or the filter
needs to be changed
Clean the box or change the
filter
Radar failure
A red light flashes slowly
and there are 4 beeps
Top radar is covered or
appliance is placed in open
area
(no barriers within 6 x 6 m)
Check if the radar is covered
or place the robot vacuum
indoors
6. COMMON FAULTS
