elvita CKB1901S, User Manual

Page: 10 / 38

10 CKB1901S
GB
BEFORE FIRST USE
Check that all the accessories are included and intact. Fill the tank with water
to the maximum level and run several brewing cycles without using coffee
grounds. Pour the water away and clean all removable parts with hot water.
INSTRUCTIONS FOR USE, COFFEE MAKER
1. Open the water tank lid and fill the tank with clean drinking water (make
sure the water does not exceed the maximum level marked on the inside of
the tank).
2. Place the included reusable coffee filter (or an ordinary filter paper) inside
the filter basket, making sure it is positioned correctly.
3. Put coffee grounds into the filter (one level spoonful per cup of coffee is
usually sufficient). Close the water tank lid.
4. Stand the carafe on the warming plate.
5. Connect the mains plug to the wall socket. The display window will show
12:00 and ( : ) will flash.
6. Press the start button (ON/OFF) (the brewing indicator will light up red). A
brewing cycle will start.
7. You can interrupt the brewing at any time during the cycle by pressing the
start button (ON/OFF) twice (the brewing indicator light will go out and RUN
will appear in the display window). Press the start button (ON/OFF) to restart
the brewing cycle.
Note:
You can remove the carafe at any time during the brewing cycle (the
unit will stop brewing automatically). You must replace the carafe within 30
seconds.
8. When the brewing cycle is completed, you can remove the carafe and serve
the coffee.
Note:
The amount of brewed coffee will be slightly less than the amount of
water you used, since the coffee grounds absorb some of the water).
9. You can leave the coffee standing on the warming plate for up to 40 minutes
(longer is not recommended). The coffee tastes best when served freshly
brewed.
10. Switch off the coffee maker and disconnect the mains lead from the wall
socket if the unit will not be used for a long time.