26
© 2022, Elon Group AB. All rights reserved.
INSTALLATION AND ASSEMBLY
Fig. 14
Fig. 15
• Parts inside the appliance may have sharp edges. Use protective equipment.
Counter Cutting Dimensions for Installation and Using
Silicone
Consider the specified safety distances for bench dimensions
(Fig. 15).
• The distance between the appliance and the back and front
of the cabinet should be 50 mm minimum.
• A minimum distance of 300 mm must be left from the right
and left sides of the appliance.
• Bench depth should be 600 mm minimum.
* It is also suitable for use of 100 mm depending on the
ventilation ducts to be used.
CAUTION!
– The furniture that the appliance will be
mounted on should be resistant to 90°C
temperature.
– The durability of the furniture that will be
mounted on should also be ensured after the
cutting operations have been completed.
– Particularly in thin plates the carrying
capacity and durability should be provided
with suitable support parts. Consider the
weight of the appliance
by including additional loads. The reinforcing
material used should be heat and moisture
resistant. The weight of the appliance is
specified in the label on the package.
– Clean the sawdust after cutting. Cover the
cut surfaces so that they are heat resistant
and waterproof.
– The cross-sectional surface angle to the
working plate should be 90°.
100*
