Elvid WCM-758DVR, User Manual, Page: 26 / 36

To start recording with the DVR, follow these steps:
Before recording, make sure all monitor and DVR settings are
properly configured.
1. In DVR recording mode, insert a microSD card into the card
slot. When the DVR recognizes the card, it will display “To
SD” onscreen, and a memory card icon will appear in the
bottom right corner of the screen.
2. Set the SkyVision to RF mode and make sure it’s receiving
a signal from your wireless video source. For more
information, refer to Setting the Signal on page XX.
3. Press the Rec/OK button to start recording video. The
status LED will blink red during recording.
To stop recording, press the Rec/OK button.
reCOrDING
& PLAYBACK
26