MOUNTING THE OPTIVIEW 100
3. Remove the protective
strip on the adhesive side
of the mounting frame.
Make sure to carefully
center the mounting
frame before securing it
on your camera’s LCD
screen. Apply the
adhesive at room
temperature.
4. Once mounted on the
camera, attach the
viewfinder to the
mounting frame. The
magnets on the
viewfinder allow it to
snap into place.
Note: Once the OptiView 100’s mounting frame is
attached to the camera with adhesive, the
adhesive cannot be reused.
1. Clean the camera’s LCD screen with a soft,
dry cloth.
2. Remove the mounting frame from
the viewfinder.
