POWerING
OPTIONs
There are two ways to power the FieldVision: AC or a
Canon LP-E6 battery.
AC POWER
To run the FieldVision via AC power, use the Elvid 12 V
DC adapter to connect the FieldVision’s DC power input to
your AC power source.
To turn on the FieldVision, press the power switch on the
back to the On position. The FieldVision will turn on and
enter standby mode, and the power indicator LED will
glow red. Press the Power button on the front to enter
ready mode. The power indicator LED will turn green and
then glow red.
CAMERA BATTERY
The FieldVision’s built-in battery plate accommodates
a Canon LP-E6 battery. This allows you to power the
monitor with a readily-available battery type that you may
already own. For more information on compatible battery
types, refer to Specifications on page 21.
9