Elvex 46617.338, User Manual

Page: 47 / 60

>> MODE :
- Auto : The mode is switched to ‘Color’ in a normal environment, but switches to
‘B/W’ mode when ambient illumination is low. To set up the switching time for
AUTO mode, press the SET button. You can turn on or off the burst signal on B/W mode.
- COLOR : The picture is always displayed in color.
- B / W : Making the video output B/W always. By selecting the color signal On or Off,
this lets the burst signal be disappeared or not.
- EXTERNAL : EXTERNAL: Day and Night can be distinguished by external output.
>> DWELL TIME : You can select the duration the camera changes from day to night mode
and night to day.
>> D→N LEVEL : Adjust the DAY→NIGHT switch level 0~255 by pressing the left or the
right button.
>> N→D LEVEL : Adjust the NIGHT→DAY switch level 0~255 by pressing the left or the
right button.
>> BURST : You can turn on or off the burst signal on B/W mode.
>> SMART-IR : It controls the IR LED(bright portion base), satuation is not expected.
DAY&NIGHT
1. MODE
2. DWELL TIME
3. D → N LEVEL
4. N → M LEVEL
5. BURST
6. SMART-IR
7. RETURN
AUTO
5 SEC
190
20
ON
IIIIIIIIIIIIIIIIIIIII
|
IIIIIIIIIIIIIIIIIIIII
|
SMART-IR
1. MODE
2. GAIN
3. H.START
4. V.START
5. WIDTH
6. HEIGHT
7. RETURN
OFF
- - -
- - -
- - -
- - -
- - -
19
CCTV
EN