Pre-Assembly Information
•
Start by familiarizing yourself with the parts above. This will make it easier to know how it all fits together.
•
You will need Phillips Head Screwdriver and a few drops of glue for the button caps.
•
It will be easier to install button caps on the back of the Stairs with walls before installing stairs.
•
Locate a flat, level work surface, like a hardwood floor or a large table.
•
Pine is a soft wood, so do not overtighten screws as you can strip out the material. This is less likely to
happen with a screwdriver, so take care when using a drill or screw gun.
•
Remember that this product is made of wood, a natural, living material. As such, humidity and dryness in
the air can influence the product. Though it has been produced with the greatest care and precision
possible you may experience minor variation in fit and finish.
•
Read instructions completely before beginning so that you fully understand the process. It’s easy and fun
to do, but you’ll feel more confident if you know what the next step is before you get there.
Parts
Caring for the Dollhouse
•
The dollhouse is made of natural wood that has been finished with Tried & True Danish Oil, a polymerized
linseed oil, which is food safe and non-toxic. To maintain the satin finish, we recommend reapplying this
oil periodically, as you notice the wood drying out. Please visit http://www.triedandtruewoodfinish.com to
find a retailer.
•
Should the wood become discolored, we recommend cleaning it with Murphy’s Oil Soap. If stubborn stains
persist, use a fine green scrubbie (such as used on pots and pans) and rub lightly following the grain of the
wood. Then apply a thin coat of the Danish Oil, according to the instructions provided.
Seri’s Dollhouse Assembly Instructions
