CMi4110 User’s Manual English v1.3
CMi4110 User’s Manual English v1.3
page | 8 (27)
[2018-06]
V1.3
5 Getting started
5.1 Purpose
This chapter provides instructions on how to get started with the CMi4110. After reading and carefully
following each step of this chapter, your meter connectivity module
will
be mounted, connected and
started up.
5.2 Product specification
5.3 Mount and start-up the device
5.3.1 Mounting and connection
CMi4110 is mounted in module slot 2 of a L+G UH50 heat meter or a L+G UC50 heat calculator.
5.3.2 Connection of antenna
If using CMi4110Ext, the SMA connector (6) is used to connect an external antenna. Please order your
desired antenna (wall-mount or magnet-mount) from the Elvaco (or L+G) accessory assortment.
Make sure to mount the antenna at least 0.5 meters away from the meter in order not to
disturb the meter and attached cables.
1. Meter interface
2. Push button
3. Green LED
4. Red LED
5. Tamper switch (optional)
6. External antenna connector (optional)
7. LoRa antenna
8. NFC antenna
