Elvaco CMi Series, User Manual

Page: 12 / 28

CMi416
0 User’s Manual English
CMi416
0 User’s Manual English
page | 12 (28) [2020-10]
V1.3
Set Time
Relative Adjusts the time of the meter
relative to the current time. N/A N/A N/A Writeable
Set absolute
time Sets the time of the meter.
When synchronizing the time
via the Elvaco OTC App, the
date, time and UTC offset
settings of the phone will be
applied to the meter. N/A Writeable N/A N/A
Set UTC
offset Sets the UTC offset of the
meter. N/A Readable /
Writeable
Readable Witeable
Configuration
Lock Locks the module to prevent
unauthorized access. Open Readable /
Writeable
Readable Writeable
LoRaWAN settings
Device EUI
Unique module identification
number. Not configurable. Device-unique
64-bit number
Readable Readable N/A
Activation
type Sets the way the device joins
the LoRaWAN network. OTAA Readable /
Writeable
Readable N/A
Network join Displays whether the module
has joined the LoRaWAN
network or not. N/A Readable Readable N/A
Join EUI Application ID that
determines where data ends
up.
0x 94 19 3A 03 03
00 00 01 (internal
antenna version)’
0x 94 19 3A 03 04
00 00 01 (external
antenna version)
Readable /
Writeable
Readable N/A
Device
address 32-bit address used by the
module to identify itself on the
LoRaWAN network. N/A Readable /
Writeable
N/A N/A
Current data
rate The current data rate used for
the module. N/A Readable Readable N/A
Table 2: Configuration options
6.4 Time handling
The module relies on the meter’s clock for keeping time. Time in the meter is assumed to be in standard
local time (no DST). When synchronizing time in the meter using the OTC App, local standard time is
always used, even if DST is in effect. The timestamped meter data sent from the module can be adjusted
to be sent in UTC by specifying the “UTC offset” configuration parameter. The UTC offset will be
subtracted from the timestamp prior to transmission. If the meter is in Sweden, which uses CET (Central
European Time), it should have UTC offset set to +60 (+1h). In this case at time 12.00 a telegram is sent
with timestamp 11.00 as this is the corresponding UTC time. A meter in New York (USA) should have a
UTC offset of -300 (-5h) etc. A UTC offset of 0 means the meter time is used as-is.