24
Used batteries should not be disposed of
with regular domestic waste. Instead, they
should be taken to your local battery dis-
posal point.
7. (Step 2) Setting the date and time of day
The firmware version number will be displayed briefly once
you have inserted/replaced the batteries and then you will be
automatically prompted to set the date and time of day.
Use the setting wheel (C)
•
to set the year (B).
Confirm with OK (D).
•
Use the setting wheel (C)
•
to set the month (B).
Confirm with OK (D).
•
Use the setting wheel (C)
•
to set the day (B).
Confirm with OK (D).
•
Use the setting wheel (C)
•
to set the hour (A).
Confirm with OK (D).
•
Use the setting wheel (C)
•
to set the minute (A).
Confirm with OK (D).
•
The motor will start moving back the control pin while the
entries are still being made.
If “InS” is displayed with a rotating “
•
∏” symbol, this
indicates that the motor is still moving back. Once the
device is ready for the actuator to be installed on the
valve, just “InS” will appear on the display.
A
C
B
D
