Elumen8 GB-1, User Manual

Page: 8 / 12

www.prolight.co.uk GB-1 Reflectabeam User Manual
8
Master/slave mode:
To set the master unit, press the “MENU” button on the front of the master unit to show
SLNd
on the
LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
Nast
.
Press the “ENTER” button to confirm the setting. Then select your desired program (sound active, DMX
or one of the built-in programs).
To set the other units in slave mode, press the
“MENU” button on the front of the unit to show
SLNd
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
either
SL1
(Slave 1) or
SL2
(Slave 2). Press the “ENTER” button to confirm the setting. The unit will
now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Show mode:
To access the show mode, press the “MENU” button on the front of the unit to show
ShNd
on the LED display. Press the “ENTER” button to confirm the setting and the display will show
ShoU
.
To exit out of any of the above options, press the “MENU” button.
Auto mode (built-in programs):
To access the auto modes, press the “MENU” button on the front of the unit to show
Auto
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons select
which auto mode you require
Aut0
or
Aut8
. Press the “ENTER” button and use the “UP” and
“DOWN” buttons to set the speed
1
~
9
. Press the “ENTER” button to confirm the setting.
Value: 1 - 9 (1 = slow, 9 = fast)
To exit out of any of the above options, press the “MENU” button.
Sound active mode:
To access the sound active mode, press the “MENU” button on the front of the unit to show
SoUn
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
sound mode
on
or
ofF
. Press the “ENTER” button to confirm the setting.
To adjust the sound sensitivity, press the “MENU” button on the front of the unit to show
Sens
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
sound sensitivity
0
~
100
. Press the “ENTER” button to confirm the setting.
Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity)
To exit out of any of the above options, press the
“MENU”
button.