11
Fixture Test
To select
Fixture Test
press the
ENTER
button to confirm, use the
UP/DOWN
button to select the
Auto Test
Mode, press the
ENTER
button to run the built-in test routine. To go back to the
functions without any changes press the
MENU
button again. Press and hold the
MENU
button for
about one second or wait for one minute to exit the menu mode.
Fixture Information
Enter menu mode, select
Fixture Information
, press the
ENTER
button to confirm, use the
UP/DOWN
button to select
the
Fixture Use Time,
LED Temp.
or
Firmware Version
.
Fixture Use Time
To select
Fixture Use Time
, press the
ENTER
button to confirm, and the total number of
fixture hours will show on the display. To go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
one minute to exit the menu mode.
LED Temp.
To select
LED Temp.,
press the
ENTER
button to confirm, the current running temperature of
the fixture will show on the display. To go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
one minute to exit the menu mode.
Firmware Version
To select
Firmware Version
, press the
ENTER
button to confirm, the software version will
show on the display. To go back to the functions without any changes press the
MENU
button
again. Press and hold the
MENU
button for about one second or wait for one minute to exit
the menu mode.
