manualshive.com logo in svg

Eluktronics p950hr, User Manual

The Eluktronics p950hr is a high-performance gaming laptop designed to deliver immersive gaming experiences. Unlock its full potential by downloading the comprehensive User Manual, available for free on our website. Delve into detailed instructions, troubleshooting tips, and get the most out of this cutting-edge product! [Download the manual for free from manualshive.com]

Share
Download
background image

Modules & Options

6 - 20 Bluetooth & WLAN Combo Module

6

Intel Bluetooth Combo Driver Installation

1.

Make sure the system is not in Airplane Mode

, and then insert the 

Device 

Drivers & Uti User’s Manual 

disc into an attached DVD drive. 

2. Click 

Option Drivers

 (button).

3. Click 

2./3.Install Combo BT Driver > Yes

.

4. Click 

Next >

 

Next

.

5. Click in the check box to accept the license and click 

Next

.

6. Select the setup type (

Typical

 is recommended) and click 

Install

.

7. Click 

Finish

.

8. See 

“Bluetooth Configuration in Windows” on page 6 - 21

 for configura-

tion instructions.

Qualcomm Atheros Bluetooth Combo Driver Installation

1.

Make sure the system is not in Airplane Mode

, and then insert the 

Device 

Drivers & Uti User’s Manual 

disc into an attached DVD drive. 

2.

Click

 

Option Drivers

 (button).

3.

Click

 

2./3.Install Combo BT Driver > Yes

.

4. Click 

Next >

 

Next

.

5. Click 

Install

.

6. Click 

Finish

.

7. Click 

Yes 

to restart the computer.

8. See 

“Bluetooth Configuration in Windows” on page 6 - 21

 for configura-

tion instructions.

Summary of Contents for p950hr



























































































































































































































































































































Reviews:

No comments

Related manuals for p950hr

IBM ThinkPad R40e Servisna Navodila In Navodila Za Odpravljanje Težav preview
ThinkPad R40e
Brand: IBM Pages: 94
IBM ThinkPad R40e Příručka Pro Základní Servis A Odstraňování Problém preview
ThinkPad R40e
Brand: IBM Pages: 102
IBM ThinkPad R40e Manual Til Service Og Fejlfinding preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Guida All’Assistenza E Alla Risoluzione Dei Problemi preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Manual De Assistência E Resolução De Problemas preview
ThinkPad R40e
Brand: IBM Pages: 98
IBM ThinkPad R40 Hardware Maintenance Manual preview
ThinkPad R40
Brand: IBM Pages: 178
IBM ThinkPad i Series Manual preview
ThinkPad i Series
Brand: IBM Pages: 162
IBM ThinkPad X30, ThinkPad X31 (MT 2672 Hardware Maintenance Manual preview
ThinkPad X30, ThinkPad X31 (MT 2672
Brand: IBM Pages: 138
IBM THINKPAD A30 Guía De Servicio Y De Resolución De Problemas preview
THINKPAD A30
Brand: IBM Pages: 94
IBM THINKPAD I 1200 - User Manual preview
THINKPAD I 1200 -
Brand: IBM Pages: 162
ECS T30II Manual preview
T30II
Brand: ECS Pages: 98
Gateway EC38 Service Manual preview
EC38
Brand: Gateway Pages: 118
Trust 16892-02 Quick Installation Manual preview
16892-02
Brand: Trust Pages: 2
Gateway MX6213j (Japanese) Getting Started Manual preview
MX6213j
Brand: Gateway Pages: 20
Zotac NB-102 Manual preview
NB-102
Brand: Zotac Pages: 28
KREZ N1403 Quick Start Manual preview
N1403
Brand: KREZ Pages: 12
IBM ThinkPad A20 Setup Manual preview
ThinkPad A20
Brand: IBM Pages: 8
IBM ThinkPad 570E User'S Manual Supplement preview
ThinkPad 570E
Brand: IBM Pages: 18

Brands by name

Popular brands

Load more brands