ELTRA NEPTUN 3060USB, User Manual

Page: 13 / 16

-13-
▌ALARM CLOCK SETTING
To set alarm clock, device must be in Standby mode. There is a possibility to set two alarm clocks.
1. Press 1
st
alarm clock setting button and hold for 3 sec. Time (hours) will start blinking.
2. Use previous / next track buttons (
►►I / I◄◄
) to set time (hours).
3. Press 1
st
alarm clock setting to confirm time (hour). Time (minutes) will start blinking.
4. Use previous / next track buttons (
►►I / I◄◄
) to set time (minutes).
5. Press 1
st
alarm clock setting to confirm time (minutes). Select alarm type by pressing
respective buttons:

USB:
Device will turn on in USB mode and start playing from 1
st
track at USB stick.

Sound signal:
Buzzer will turn on.

FM Radio:
Device will turn on in FM mode at last set radio station.

CD:
Device will turn on in CD mode and start playing from 1
st
track at CD Disc.
6. Press Previous track / Tuning down and Next track / Tuning up buttons to set alarm volume.
Press 1
st
alarm clock setting to confirm.
To set second alarm, follow above steps using 2
nd
alarm clock setting button.
To turn on alarm clock press 1
st
alarm clock setting / 2
nd
alarm clock setting button.
▌
SNOOZE
Alarm can be postponed by 9 min by pressing SNOOZE button.
▌SLEEP
1. Press SLEEP button to enter settings.
2. Press SLEEP button to change sleep time (120, 110, 100 ... 10, 5, OFF).
3. To cancel SLEEP function, follow steps 1
– 2 and change sleep time to „OFF”.
▌LISTENING TO THE RADIO
Select „Radio” Mode by pressing
Selection: Radio, CD, USB, AUX button.
There are two options of tuning.
Auto tuning:
Important! All pre-defined raio stations will be overwritten.
Press
Auto tuning button and hold for 3 sec.
System will scan all frequencies and rank stations from lowest to highest frequency.
Manual tuning:
Press previous / next track buttons (
►►I / I◄◄
) until you find search station. By holding one of
buttons device will automatically find nearest station.
ATTENTION:

When interferences occur change set, or antenna position.

Press FM Stereo button and hold for 3 sec. to choose MONO / STEREO mode.

For radio stations with weak signal MONO mode is recommended.
▌AUTO TUNING
1. Press Auto tuning button and hold for 3 sec. to run auto tuning.
Stations with sufficient signal will be saved in memory ranked by frequency. Station number will
be displayed on screen and radio stations automatically assigned. Every number means 1 radio
station.
2. Press Pre-defined station selection button after auto tuning to choose respective pre-defined
station. There is possibility to program 20 stations.
EN