Technical information
33
7.5 Attaching and removing the plastic pipes
To connect the plastic hose (KS), simply press as far as possible into the relevant connector.
Fig. 19: Connecting the plastic pipe
To remove the plastic hose (KS), first press the plastic ring (KR) of the connector against the
metal ring and then pull the pipe out, keeping the ring pressed.
Fig. 20: Removing the plastic pipe
Proceed as follows to reinstall the sample changer:
•
The analyzer has been switched off (the power switch is in the 0 position).
There is no compressed air supply to the analyser.
KS
KR
KS
