ELTRA CS-800, Operating Manual

Page: 12 / 28

Operating the machine
12
1.7 Electrical and pneumatic connections
Fig. 11: Electrical connection: Motor arm
•
Install the 9-pin socket (1)
• Fix with the screws (2).
• Plug in the 9-pin connector (1) of the finger’s motor into the 9-pin socket; see
figure electrical circuit (1).
Fig. 12: Electrical connection: the 25-pin plug
•
Locate the electrical cable with a 25-pin plug, coming out of the analyzer.
Plug it in the 25-pin socket, as on the picture above.
1
5
9
6
F r o n t p a n e l
1
2
G