10
Operating concept of the joker² controller
Copyright eltima electronic 2022
Operating concept of the jok
e
r
²
controller
The controller is operated and set up through a number of “levels”, in which
the function of the system can be observed or parameters can be changed.
Each level is marked by an icon in the upper right corner of the display.
Except for the on/off button all control buttons are designed as touch sen-
sors (without tactile feedback).
The following levels are available in the specified order:
Working and set-up levels:
Working level
Alignment level
Parameter levels:
Basic Parameters
Parameters for output a
Parameters for output b
Parameters for output c
Parameters for output d
Parameters for experimental photography,
steps, or X-levels
-
System parameters
To move along the levels, touch the
or
key.
The
key allows switching from any level, except the working level, to the
alignment level
.
If the levels
-
for experimental photography are not needed
these can be hidden. To do this set the system parameter "Exp mode"
to "no", see
on page 38.
Figure 7: navigating through the levels