____________________________________________________________________________
_____________________________________________________________________________
User manual, WOP-12ac 19
2.
Fix the device on the wall
Figure 13 – Wall-mounting the device
a.
Install the device on the top untwisted screws of a bracket attached to a pole, see
Figure Figure 13.
b.
Install screws in the bottom bolthole, see Figure Figure 13.
c.
Tight up the top and bottom screws by using screwdrive.
3.5.4
Grounding scheme of the device
After device installation, you must ground it by using 2.5 mm
2
vinyl-insulated wire. Figure 14
shows grounding scheme of the device
Figure 14 – The device grounding scheme
