background image

  WOP-12ac-LR. Quick guide for FBWA configuration via web interface

25







1.
2.

PPPoE

 – operation mode when PPP session is established on WAN interface;

PPTP

 – operation mode when the Internet access is established via a tunnel, using PPTP.

5. Set the flag 

«Use VLAN in external network»

. In the 

«VLAN

 

ID»

 field specify the VLAN number used for the 

Internet service.
6. To apply the new configuration, click the 

«Apply»

 button.

For the example above, the following settings are used:

Select the 

«Router»

 operation mode;

In the 

«Protocol»

 field, select 

«PPPoE»

;

In the 

«Username»

 field enter 

«test»

;

In the 

«Password»

 field: 12345678;

In the 

«Second access»

 field select 

«DHCP»

;

In the 

«VLAN ID»

 field specify the VLAN ID: 11. 

4.4  VoIP service configuration

4.4.1 

For VoIP, the Internet VLAN is used

Go to the 

«Settings»

 section in the 

«Network»

 field to the 

«Internet»

 field.

Set the flag in the 

«Use second access for VoIP»

 field:

3. Go to the 

«VoIP»

 menu To the 

«Network settings»

 tab. Set the flag in the 

«Use Internet settings»

 field:

Summary of Contents for WOP-12ac-LR

































Reviews: