396
SMG Digital Gateway
APPENDIX I. WORKING WITH VAS SERVICES
Beginning from the firmware version 2.15.01, the device features the following VAS:
Call forward unconditional — activate call forward unconditional service (CF Unconditional).
Call forward on busy — activate call forward on busy service (CF Busy).
Call forward on no reply — activate call forward on no reply service (CF No reply).
Call forward on out of service — activate call forward on out of service (CF Out Of Service).
Call hold (Call hold).
Call transfer — activate call transfer service (Call Transfer).
Three-way conference (3Way). Call pickup (Call pickup).
Conference with consequent assembly (CONF).
Disable conference when an initiator leaves the conference
– when checked, the conference will
be disabled when an initiator leaves the conference. Otherwise, the conference will be saved even
when the initiator leaves and will be over only when all the participants leave.
Intercom call — call service with the Subscriber B automatic reply.
Paging call — service is similar to Intercom but with a call performed to the conference number.
Password change (PWD);
Out calls restriction;
Egress connection via password (PWD ACT);
Password activation (RBP);
Do not disturb (only for SMG-2016);
Black list (only for SMG-2016);
Reset all services.
VAS functionality becomes available only when additional SMG-VAS license is installed.
For VAS utilization by a subscriber, select the
'Enable VAS'
checkbox in the subscriber settings.
To activate a specific VAS, select the checkbox next to the required service in the 'VAS activation' menu
of the subscriber settings.
