User manual for NV-711, NV-711-Wac 8
2
DESIGN
This section describes the design of the device case: the front, back and side panels of the device,
connectors, led indicators and controls.
2.1
Front panel of the device. Status indicator
The appearance of the front panel of the device is shown in the figure 2.
Figure 2 – Front panel of the device
The current state of the device is displayed through the light indicator (1) located on the front panel.
The meaning of the indicator states is described in the table 2.
Table 2 – device status light indication
Indicator (1) state
Device status
Solid green
The device is switched on and ready to operate
Solid red
The device is connected to a power supply, but is in a standby or recovery mode
Off
The device is disconnected from a power supply or faulty
2.2
Rear panel of the device. Description of the ports
The rear panel of the device is shown in the figure 3.
Figure 3 – Appearance of the rear panel of the device
The following connectors and controls are located on the back panel of the device (see table 3).
