____________________________________________________________________________________
____________________________________________________________________________________
NTU-2V, NTU-RG
Optical Network Terminals
39
4.5
The
Wi-Fi Menu
. Wi-Fi Network Setup
4.5.1
The
Basic Submenu.
General
This menu is intended for general setup of the LAN wireless interface and allows user to specify up to
three wireless access points.
—
Enable Wireless –
enables Wi-Fi on device;
—
Enable Wireless Hotspot2.0 –
enables Hotspot2.0 support on device;
—
Hide Access Point –
sets access point into the hidden mode (router will not broadcast SSID of the
wireless network in this mode);
—
Clients Isolation –
when the flag is set, wireless clients can not communicate to each other;
—
Disable WMM Advertise –
disables WMM (Wi-Fi Multimedia – a QoS for wireless networks);
—
Enable Wireless Multicast Forwarding (WMF) –
enables WMF;
—
SSID (Service Set Identifier) –
assigns a name to the wireless network (case-sensitive keyboard input);
The default name (SSID) of the wireless network is ELTEX-aaaa,
where аааа are the last 4 digits of WAN MAC. WAN MAC is labelled on the device housing.
—
BSSID –
МАС address of the access point;
—
Country –
specifies location (country);
—
Country RegRev –
specifies region ID (0-34 for Russia);
—
Max Clients –
the maximum possible number of simultaneously supported wireless connections.
Click the
Apply/Save
button to accept the changes.
