11
Elterm M.M.Kaszuba Sp.J., ul. Przemysłowa 5, 86-200 Chełmno www.elterm.pl
Room and DHW programs - settings
Room and DHW programs enable setting and maintaining requested temperature at any defined
time periods with one minute accuracy. Intuitive menu and illuminated display make the
programming process easy. All settings are stored in non-volatile memory and are not deleted
even in case of a power off. Electronic processor enables setting 9 independent programs, each
can define requested temperature within any given time span.
When two different temperatures from different programs overlap, higher one is prioritized.
I
MO
TU
WE
TH
FR
SA
SU Active days: all
II
MO
WE
FR
SU Active days: 4
III
MO
TH
SU Active days: 3
IV
MO
TU
WE
TH
FR
SA
SU Active day: 1 (to choose)
V
MO
TU
WE
TH
FR
Active days: working days
VI
SA
SU Active days: weekend
VII
MO
TU
WE
TH
FR
SA
Active days: 6
VIII
Active days: any
IX
Active days: any
1. Weekdays, 2. Program start, 3. Program stop, 4. Temp. setting: 20-70°C,
5. Active: yes/no, 6. Program number: from 1 to 9, 7. Function buttons
1.8. Settings/ROOM programs – press on home screen (C) and enter SETTINGS (J), then choose
Room programs (L) and press once more. Using
←→
(Z) switch between parameters
(weekdays, working time, temperature, status), using
↑↓
change parameter value, which is then
set by pressing .
1.9. Settings/DHW programs (for AsDC-W and DHW set) – press on home screen (C) and enter
SETTINGS (J), then choose DHW programs (L) and press once more. Using
←→
(Z) switch
between parameters (weekdays, working time, temperature, status), using
↑↓
change
parameter value, which is then set by pressing .
Active/Inactive status – each program can be temporarily turned off. In order to do that, change
status within selected program (either Room or DHW one) for: no (b). To activate previously
turned off program – set status for: yes (a).
1.10. Settings/Circulation pump – press on home screen (C) and enter SETTINGS (J), then
choose Circulation pump and press once more. Using
←→
switch between parameters
(weekdays, working time, temperature, status), using
↑↓
change parameter value, which is then
set by pressing .
