
How do I know if the modem is connected to the network?
A red LED is located adjacent to the SIM tray on the modem. Ensure a valid SIM is installed
correctly (see below) and an antenna connected.
LED cadence
:
Continuously ON: No network connection
or no SIM installed!
Flash every two secs:
Connected to network
Fast flash:
Data call in progress
SIM Installation
"
Correct orientation is gold contacts must face
up
"
To insert the SIM, gently push home the SIM (it
will latch) and move slider across to secure SIM
in place and activate the modem. To remove
the SIM, move slider and press the SIM to
unlatch. (Disconnect power to remove or install
SIM.)
Use only the supplied GSM antenna. The antenna
lead can be extended – refer to Eltek for 5m
extension lead.
Note: The system has no means of indicating credit
on a SIM.
Using the GSM kit outside UK or Europe
The GSM kit is preconfigured for the UK and Europe
– no adjustment is required.
For R.O.W users please contact Eltek or our regional
representative.
T 1
GB
U 065
25/05/16