UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual
Subject to Change without Notice
16
Insert following data:
Minimum Range
Maximum Range
Radar Azimuth – Radar azimuth relative to the north [degrees]
Frequency Band – Default value that will need to be changed in case of using several radars to
avoid interference between the radars.
Click on the Close Tab in order to save the setup data in the system.
5.1.4.
North Alignment of the radar
After setting the radar to Tx On, find a significant known location reference target within the Radar ROI.
Verify that the target known geo-position location is aligned with target's location presented on the display.
If there is a mismatching, check the radar's location and azimuth settings and perform the realignment
