9.3.3 Center Speaker
Selection of
Large
or
Small
is same with that of front speaker. The speaker will have no signal output if set to None.
Notes: If the Subwoofer is
On
, Center is set to
None
or
Small
, and bass from the center channel is redirected to the
subwoofer. If the content contains a discrete subwoofer channel, it is also sent to the subwoofer. If the Subwoofer is
Off
,
Center is set to
None
or
Small
, and bass from the center channel is redirected to the left and right channels. If the content
contains a discrete subwoofer channel, it is discarded.
9.3.4 Surround Speaker
Selection of
Large
or
Small
is same with that of front speaker. The speaker will have no signal output if set to
None
.
Notes: If the Subwoofer is on, Surround is set to
None
or
Small
, and bass from the surround channels is redirected to the
subwoofer. If the content contains a discrete subwoofer channel, it is also sent to the subwoofer.
If the Subwoofer is
Off
, Surround is set to
None
or
Small
, and bass from the surround channels is redirected to the left
and right channels. If the content contains a discrete subwoofer channel, it is discarded.
9.3.5 Subwoofer
Selecting to enable/disable the subwoofer output when 6 Channel analog output is used. The following options are available:
None
Subwoofer is off. Bass from center and surround channels is redirected to the left and right channels. If the content
contains a discrete subwoofer channel, it is discarded.
Present
Subwoofer is on. Bass from center and surround channels is redirected to subwoofer. If the content contains a
discrete subwoofer channel, it is also sent to the subwoofer.
Note: Bass Management is not available for MP3 or WMA bitstream ; therefore, it will be disabled during the playback of
those streams.
9.3.6 Test Tone
Selecting the
Test Tone
setting allows the user to test the player’s audio output on each speaker. When you select channel,
a short burst of pink noise will be sent to corresponding channel
9.3.7 Center Delay
Selecting the
Center Delay
setting allows the user to enable/disable the center output delay.
9.3.8 Surr. Delay
Selecting the
Surr. Delay
setting allows the user to enable/disable the center output delay.
9.3.9 Digital output
Selecting the
Digital Output
setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the
audio equipment (e.g. receiver, speakers) connected to the player.
Off
Digital audio output is disabled.
PCM
Select this option when you are going to use stereo signals (2 channels). You should combine this option with the
option "Lower sampling rate," which we explain further on
All
If you select this option the player will use the DVD's original audio track. Use this option when you want to use the
Dolby Digital AC3 signals through the optical or coaxial audio output.
9.3.10 Night Mode
To adjust the linear compression ratio , select to
ON
when playing a disc in the day so as to get better acoustical effect; while
at night, you can select to
OFF
.
9.3.11 Prologic
Off:
Pro Logic decoding is off. Two-channel sources are output only on the left and right channels.
On:
Enable Pro Logic decoding
36
02-8847MP4N-GB 4/26/06 2:50 PM Page 36
