HIT
Inst Issue 14: 18.10.17
2.10 Means for electrical disconnection must be incorporated in the wiring installation in
accordance with the relevant wiring and electrical regulations.
WARNING
The fan must be isolated from the power supply during installation and
maintenance. The fan must be earthed in accordance with the local regulations.
3.
3.1 Refer to the appropriate wiring diagram. Ensure that all earth connections are made.
3.2 The fan is to be installed so that the blades are more than 2.3m above the floor (for fans
intended to be mounted at high level).
3.3 Precaution must be taken to locate the exhaust discharge terminal so as to avoid the
backflow of gases into the room from the open flue of gas or other fuel burning
appliances.
Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer:
The life of this apparatus and its efficiency will be increased if its use and
maintenance is carried out in accordance with these instructions and current statutory
requirements. The installation and initial adjustments should be carried out by a qualified
and competent technician. Hydor Limited should be consulted before substituting or fitting
parts from another manufacturer. It is the responsibility of the installer to verify that
the installation is in accordance with the following standards and the owner is given
the current User’s Manual.
Any modifications to the fan or its installation, even the smallest modification, change
or elimination of security components or pieces that influence the efficiency or loss of
ventilation, will result in Hydor’s warranty being cancelled.
4. Installation
4.1 Upon receipt, the fan equipment should be visually inspected to check for any damage.
Ensure that the impeller is free to rotate.
4.2 If there are any queries concerning the fan equipment, Hydor should be contacted prior
to the installation.
4.3 Use the mounting bracket set supplied with the HIT fan to fix the fan in the desired
position to suit the application. The fan can be mounted at any angle. If the fan is
mounted with vertical outlet, a weather proof cover must be installed at the ducted
outlet.
