background image

Elster-Instromet

20

73021678b           © Elster GmbH • All rights reserved • Subject to technical modi

fi

 cation

17. Care and Cleaning

-  

Clean off dirt on the meter only with a damp cloth.

-  

Do not clean the meter and its accessories with solvent.

-  

Any media gentle on the applicable materials can be used as cleaning media.

18. Recycling and Environmental Protection

Elster-Instromet has reduced the transport packagings of the measuring instruments 
to the bare essentials. Packaging materials are always selected consistently with 
a view to recycling. The cardboard items used constitute secondary raw materials 
for the paperboard and paper industry. The Instapak

®

 

foam packaging

 items are 

recyclable 

and can be

 reused. 

Plastic sheeting and strips/bands are also made of recyclable plastic.
At Elster-Instromet, subsequent recycling and disposal are already elements of the 
product development process. When selecting the materials, we allow for reusability 
of the materials, suitability of materials and subassemblies for dismantling and 
separation, and the risks of environmental pollution and health risks when recycling 
and dumping on land

fi

 ll sites. The rotary gas meters mainly consist of metallic materials 

which can be melted down again in steelworks and metallurgical plants and which 
can thus be reused a virtually unlimited number of times. The plastics used are listed 
in Annex B so that sorting and separating of the materials for the purposes of subsequent 
recycling is possible.

The oil supplied is Shell Morlina S2 BL 10 (mineral oil), coloured red 
(pigment ratio 10 ml / 100 l oil) and, like all mineral oils (e.g. car engine oil), 
must be disposed of in an environmentally safe way.

Summary of Contents for RABO G16

























Reviews: