2
About these Instructions
enCore FC1
Operating Instructions
Page 11 of 97
2.1 Target Group Definition
The present documentation is directed to qualified electricians in the fields of
switch cabinet construction and maintenance, as well as qualified personnel
with specialized knowledge in device assembly and commissioning.
The qualifications for different areas of activity are listed below:
•
trained individual
A person, who has been instructed by the plant operator in an
informational session on the tasks assigned to him or her, and on
possible hazards in case of improper behavior.
•
specialist personnel
A person who has the ability, because of his or her technical
training, knowledge and experience, as well as his or her
knowledge of the relevant regulations, to carry out the work
assigned to him or her at the FC1, and to recognize and avoid
possible hazards independently.
•
gas specialist
A person who has the ability, because of his or her technical
training, knowledge and experience, as well as his or her know-
ledge of the relevant standards and regulations, to carry out work in
gas systems, and to recognize possible hazards independently. A
gas specialist receives training for the specific location in which he
or she works, and is acquainted with the relevant standards and
regulations.
•
metrology expert
A person who has the ability and is authorized, because of his or
her technical training, knowledge and experience, to carry out
legally relevant tasks in gas systems within the scope of legal
metrology. A metrology expert is acquainted with the relevant
standards and legal regulations that apply in specific countries. In
the European the legally relevant tasks are executed by the
designated notified body.
•
qualified electrician
A person who has the ability, because of his or her technical
training, knowledge and experience, as well as his or her know-