Elster EnCal 3000, Technical Documentation Manual, Page: 22 / 118

page 16 EnCal 3000
After the Monitoring menu has been invoked, the error listing
of stream A is displayed first. This is indicated by the text Gas
Quality A in the third line.
To view the error listing of stream B, proceed as follows:
1) Press the Menu key to invoke the listing of the
subordinate menu items.
2) Press the rightward arrow key until the Next listing menu
item is selected.
3) Press the Enter key. The error listing of stream B is
shown indicated by the phrase Gas quality B in the third
line.
There may be up to three error listings. In addition to one or
two gas quality error listings, an error listing of the Monitoring
module’s message processing is also available. Always switch
to the display of the next error listing via the
Next listing menu
item.
Please refer to Chapter 5.2, page 40 for further information on
the error listing of the message processing.
4.3 ... accept gas quality errors?
Errors can only be accepted and thus removed from the gas quality error listings if they are no longer pending.
To accept such an error, proceed as follows:
1) Open the error listing via the Menu key as described
above in Chapter 4.2. If the EnCal 3000 Controller is
operated with more than one stream, please ensure that
the error listing of the desired stream is indicated. The
third line of the display indicates the stream to which the
currently invoked error listing refers.
2) Select the error you want to accept via the rightward or
leftward arrow key.
3) Press the Menu key. If the error indicated on the display
cannot be accepted, the first menu item appears as being
crossed out: Accept . If the error can be accepted, just
select Accept and press the Enter key. The error
Gas Quality A Error Listing
Gas Quality B Error Listing
Monitoring Error Listing
Next Listing