From Unpacking to Connection
13
4.3 Connection
DANGER! Electrical Current!
The N8LED is operated by an alternating current. There is always risk of electrical
shock in this context. Therefore: Do not insert the power connector until the device
is properly plugged in!
Guide the supply line through the lamp opening in which the recess for the line
stopper is located.
Place the angle coupling of the supply line on the attachment plug of the lamp,
tighten the union nut and place the supply line stopper in the provided recess.
Plug the supply line plug into the supply socket.
Ensure that there is no dirt between the cooling fins, as this could destroy the
LEDs under certain circumstances. Regularly remove dirt and foliage.
WARNING! Tripping Risk!
Run the cables which lead to the N8LED so that no tripping hazards are created.
Cover the cable if necessary with a cable bridge.
If you use an extension cord, ensure that the connections do not lie in water
(e.g. in a puddle).