Elsner Corlo Touch KNX 70258 Installation And Operation Manual Download Page 66

Page: 66 / 144

System settings via touch display

Display Corlo Touch KNX

• Status: 09.03.2017 • Technical changes and errors reserved.

3.7.

Alarm

The six alarm functions of the

Corlo Touch KNX

show messages in the display. At

the same time, the display may flash, and an alarm tone emitted. The alarm can be
acknowledged directly on the display or via the bus.

The reaction upon an alarm may be adapted in the menu



Settings > system > alarm

The menu can be secured with an access code.



Access codes for display menus

, Page 50

Screen with alarm messages, alarm 1 "tank
empty" is active.

Acknowledge the active alarm by pressing
the button. Several alarms may be active at
the same time.

Text and symbol may only be set in the ETS.

Summary of Contents for Corlo Touch KNX 70258

















































































































































Search results

Summary of Contents for Corlo Touch KNX 70258

Reviews:

Related manuals for Corlo Touch KNX 70258

Brands by name

Popular brands

Elsner Corlo Touch KNX 70258, Installation And Operation Manual

Search results

Summary of Contents for Corlo Touch KNX 70258

Reviews:

Related manuals for Corlo Touch KNX 70258

Brands by name

Popular brands