82
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Function:
Display of the block with number and type of output.
Name:
Shows the name of the temperature regulator. Touch the field and enter the desired
name using the keyboard that appears.
The name of the channel can also be entered in the ETS. The most recent change in the
ETS or the control center applies.
Symbol:
Displays the selected symbol. Touch the field and select a symbol from the lists.
Manual menu:
Shows whether the regulator is displayed in the manual menu and in the start menu.
Touch the field and make your selection.
The display on the start page is below the menu items "System" and "Manual menu".
The display sequence can be set in the menus
System > Set screen > Start page or manual menu
5.2.4. Start page, Page 84
5.2.5. Manual page, Page 85
5.2.2. Assign group buttons
Multiple motors or devices can be operated simultaneously in the manual menu via a
joint group button (internal software button). 20 group keys are available.
System > Set screen > Group keys
Select the individual buttons from the list on the right and apply them consecutively. If
no settings have been made, the fields show
Group button 1...20
. If a button has al-
ready been configured, the function or name is displayed instead.
Type of button:
Shows the set button function. Touch the field and select:
•
Reserve (unused)
•
Group button
Name:
Shows the name of the button. Touch the field and enter the desired name using the
keyboard that appears.
