85
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Building on automatic:
Select here whether the "Building on automatic" function is to be displayed on the start
page.
With this function, all drives and lights for which an automatic reset has been set are
put back into automatic mode.
5.2.5. Manual page
The menu item "Manual menu" is on the left side of the start page. This manual page
shows motors and devices for the manual operation.
System > Set screen > Manual page
So that a motor or device is displayed in the manual menu, the setting "Manual menu"
has to be activated in the installation settings.
System > Set screen > KNX settings > ... > Manual menu.
Display sequence:
Touch the field to specify the display sequence in the manual menu. All entries are
shown in a list. Hold an entry by the list symbol on the right and move it to the desired
position.
Subject groups:
Touch the field to create subject groups.
As soon as a subject group has been activated, motors and units
in the manual menu are no longer displayed singly.
All groups are shown in a list. Hold an entry by the list symbol on the right and move
it to the desired position.
Activate the groups that you wan to use by taping the checkbox. A pencil icon appears,
which touch to edit the group.
•
All visible channels (not possible selections)
•
Central function (scenes, group button)
•
Room controls (heating, air-conditioning)
•
Floor (all functions)
•
Output (motors, group keys)
•
Input (sensors)
You can activate, sort and edit other subgroups in each group.
Name:
Displays the name of the subgroup. Touch the field and enter the desired name using
the keyboard that appears.
