80
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Function block B (switching/dimming, operation and
displays, alarm):
A list of all the operation and display elements, and all sensors and alarm messages
are displayed, which have been set up in the ETS for communication with the control
center.
4.3.8. Function blocks, Page 52
Push the button of the
Alarm message
/
Sensor/operation/display element
that
you want to set.
Function:
Display of the block with number and type of input or output.
Name:
Shows the name of the sensor/control/display element. Touch the field and enter the
desired name using the keyboard that appears.
The name of the channel can also be entered in the ETS. The most recent change in the
ETS or the control center applies.
Symbol:
Displays the selected symbol. Touch the field and select a symbol from the lists.
Manual menu:
Shows whether the group button is displayed in the manual menu and in the start
menu. Touch the field and make your selection.
The display on the start page is below the menu items "System" and "Manual menu".
The display sequence can be set in the menus
System > Set screen > Start page or manual menu
5.2.4. Start page, Page 84
5.2.5. Manual page, Page 85
Alarm message A/B (only for alarm message):
Configure the alarm message here.
Text:
Shows the text of the alarm message. Touch the field and change the text.
Symbol:
Displays the selected symbol. Touch the field and select a symbol from the lists.
