28
Operation
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
•
SD card:
Save the setting details for the control center on SD card or read from
SD card
•
KNX bus:
View the physical address and activate/deactivate programming
mode
•
Internet:
Set up the internet/network connection
•
Email message:
Send alarm message to email address
•
Device information:
Load updates and view software versions of the control
center
Set screen:
•
KNX settings
•
Set up group switches and scenes for the manual menu
•
Set up the start page and the manual menu
•
Weather data
•
Control safety functions
•
Configure presence simulation
Set automatic mode:
•
Specify automatic functions of the individual motors and devices
•
Adjust general automatic settings: Twilight value, movement delays, time
switch, ventilation lock, night back cooling, frost alarm, movement
restriction,wind delay and automatic reset
On the
bottom edge of the display
you will see a
Navigation menu
with "Back"
arrow and a circle, which takes you back directly to the start page.
2.4.
Internet (browser)
The
CasaConnect KNX Control Center
has a browser for accessing internet pages
on the WorldWideWeb. Music and video streaming services can therefore also be
used. There must be an internet connection in order to use these functions.
Start the browser via "Open website" in the top menu bar. Enter the web address (URL).
Navigate by touching the screen (touch display).
Websites can be shown in the display area on the right or as full screen. The switch
field is located on the lower edge of the display. The "Create bookmark" button is also
located here. With this, you create a link (bookmark button) in the start menu beneath
the system and manual functions, through which the website can be accessed quickly.
You can edit the name of a bookmark later in the menu:
System > Set screen > Start page > Bookmark
You can also delete individual bookmarks here.
PDF documents cannot be displayed or downloaded in the browser of the
CasaCon-
nect KNX Control Center
.
Full screen mode can be enabled and a website can be saved as a bookmark using the
two "Full screen" and "Create bookmark" buttons at the bottom right.
